Grocery & Retail Stores
Aisles, checkout lanes, entryways, and back-of-house VCT that takes constant traffic.
Floor Stripping & Waxing in Los Angeles County
Strip worn, yellowed finish down to the tile and rebuild it with fresh coats — VCT and commercial hard floor refinishing done overnight so your facility keeps running.
What We Handle
Restore Worn Floors to Like-New Condition
Over time floor finish wears down, traps dirt, and loses its gloss. A full strip and refinish removes the old finish completely and applies fresh coats for a clean, professional appearance and added protection across Los Angeles County facilities.
Every Ironcrest crew is licensed, insured, bonded, and background-checked, so you can hand over after-hours access with confidence. We use commercial-grade strippers, neutralizers, and finishes matched to your floor type and schedule the work overnight or during low-traffic windows.
- Floor inspection, testing, and product selection
- Furniture and fixture move-out where required
- Deep strip of old finish with a commercial floor machine
- Slurry pickup, rinse, and neutralize to remove residue
- Multiple thin coats of commercial floor finish with dry time
- High-speed burnishing to a gloss when specified
- Fixtures replaced and a walkthrough with your site contact
Who We Serve
Where Stripping & Waxing Matters Most
Schools & Campuses
Summer-break stripping and refinishing of hallway, classroom, and cafeteria floors.
Medical & Professional Offices
Waiting rooms, corridors, and exam-room VCT kept clean and presentable.
Office Buildings
Lobbies, common areas, and break rooms where first impressions count.
Auto Dealerships
Showroom and customer-facing floors held to a high-gloss finish.
Warehouses & Facilities
Breakrooms, restrooms, and finished-floor areas inside industrial buildings.
How It Works
From Old Finish to a Fresh Shine
1
Inspect & Prep
We test the floor, choose the right stripper and finish for your tile, move furniture, and block off the area for an overnight window.
2
Strip the Old Finish
Stripping solution and a floor machine break down every layer of old finish, then we pick up the slurry down to the bare tile.
3
Rinse & Neutralize
A clean-water rinse and neutralizer remove residue so the new finish bonds properly, then the floor is left to dry fully.
4
Refinish & Cure
We apply several thin coats of fresh finish with dry time between each, let it cure, and confirm the floor is ready before you reopen.
Pricing
Straightforward, Quote-Based Pricing
We don't publish flat rates because no two floors are alike. After a short walkthrough we send a written quote based on what your floor actually needs:
- Total square footage to be stripped and refinished
- Current floor condition and finish build-up
- Number of finish coats and whether burnishing is included
- Furniture, fixtures, or shelving that must be moved
- After-hours, weekend, or restricted access requirements
- One-time refinish versus a recurring maintenance program
Areas We Serve
Floor Stripping & Waxing Across Los Angeles County
We strip and refinish commercial floors throughout Los Angeles County. A few of the markets we serve:
Los Angeles
Downtown, mid-city, and Westside retail and office floors.
San Fernando Valley
Stores, schools, and business-park VCT across the Valley.
Santa Clarita
Retail and commercial hard floors throughout the SCV.
Burbank
Media, studio, and corporate building floors.
Glendale
Downtown Glendale and Brand Boulevard storefronts.
Pasadena
Professional, medical, and Old Town retail floors.
Santa Monica
VCT refinishing for Promenade retail and Silicon Beach offices.
Long Beach
Downtown and business-district commercial floors.
Torrance
South Bay retail, office, and facility floors.
FAQs
Floor Stripping & Waxing Questions
What does a full strip-and-wax include?
A full service removes every layer of the old finish down to the bare tile, then rebuilds it. We inspect the floor and select the right products, strip the old finish with a commercial stripper and floor machine, pick up the slurry, rinse and neutralize the surface, let it dry, and apply several thin coats of fresh commercial floor finish with dry time between coats. When specified, we burnish the cured finish to a high gloss.
How often should VCT floors be stripped and refinished?
It depends on traffic. Busy Los Angeles County retail floors, entrances, and school hallways often need a full strip and refinish once or twice a year, while lower-traffic offices can go longer. Between strips, regular scrubbing and buffing keeps the finish protected, so most floors need far fewer full strips when a maintenance program is in place.
How long before we can walk on the floor after refinishing?
Fresh finish needs time to dry between coats and then cure before it takes traffic. We schedule the work overnight or over a weekend so the floor is dry and ready for light foot traffic before you reopen. We confirm the return-to-service window with your site contact up front so nobody walks on a wet coat.
Can you strip and wax after hours so it does not disrupt operations?
Yes. Stripping and waxing is disruptive by nature — the floor is wet and closed off during the work — so we almost always run it overnight, early morning, or over a weekend. This is standard for the stores, offices, and facilities we serve across Los Angeles County, and it keeps your business open during the day.
What floor types can you strip and wax?
We strip and refinish VCT (vinyl composition tile) most often, along with other finished hard floors that are designed to hold floor finish. Some surfaces — such as certain sealed concrete, natural stone, and specialty floors — are maintained differently and should not be waxed. During the walkthrough we confirm your floor type and recommend the right approach.
How much does floor stripping and waxing cost?
Stripping and waxing is quoted per job rather than a flat rate, because pricing depends on square footage, floor condition, how many coats of finish you want, furniture that needs moving, and after-hours access. We provide a free walkthrough and a written proposal with a clear scope before any work begins.
Related Services
Pair With Ongoing Floor Maintenance
A fresh strip and wax lasts longer when it's backed by regular buffing and a maintenance program under one accountable vendor.
Commercial Floor Care
Full floor maintenance programs for commercial facilities.
Learn more about Commercial Floor CareFloor Buffing & Polishing
Maintain gloss between strip cycles with high-speed buffing.
Learn more about Floor Buffing & PolishingJanitorial Services
Recurring cleaning that protects your refinished floor.
Learn more about Janitorial Services
Guides
Related Reading
How Often Should VCT Floors Be Stripped and Waxed?
How to judge strip-and-wax frequency for commercial VCT by traffic, and when a scrub-and-recoat is enough.
Read guide: How Often Should VCT Floors Be Stripped and Waxed?Ready to Refinish Your Floors?
Tell us about your floors, square footage, and schedule. We will walk the space and send a written quote — licensed, insured, and bonded, with background-checked crews.
Request a Quote Call (661) 877-4189